Installation
Wall preparation for beautiful and long-lasting results is always important. Check out the instructions below to get you on your way to having beautiful walls!
Wallpaper installation services available in South Florida (Broward/Miami). Please email us for more details!
Before You Begin
​
✅ Check your wallpaper to make sure it arrived in perfect shape.
✅ Remove any old wallpaper, paint residue, ink, or crayon marks.
✅ Make sure your walls are smooth, dry, and free of bumps or mold—sand if needed.
✅ Wipe down walls with a mix of 30% isopropyl alcohol & 70% water.
✅ Freshly painted walls? Give them 30 days to fully dry before applying wallpaper.
​
What You’ll Need
​
-
A level
-
Squeegee or smoothing tool
-
Straight wallcovering edge tool
-
Measuring tape
-
Utility knife
-
Scissors
Let’s Hang!
​
-
Start Straight – Use a level to find a straight starting point on the left side of your wall.
-
Peel & Stick – Peel back about 10 inches of the backing and apply from the top, leaving a little extra (about 1 inch from the top of the wall). Smooth as you go and remove the backing gradually.
-
Smooth It Out – Use a squeegee or smoothing tool to press out air bubbles.
-
Keep Going – Line up the edges and repeat with the next panel.
-
Trim & Tidy – Once all panels are up, use a straight wallcovering edge tool to guide your cuts for a seamless finish. This makes it much easier to trim any extra wallpaper from the top, bottom, and around outlets with a utility knife. Give everything one last smooth-down!
When It’s Time to Remove
-
Gently peel from a top corner, pulling slowly and evenly.
-
If it’s sticking, warm it up with a blow dryer on HOT to loosen the adhesive.